Log in Sign up
Cart

Denon PMA-900HNE - Integrated Network Amplifier

Rs. 117,900

PMA-900HNE

Key Features

  • 2-Channel Configuration
  • 50W per Channel Power Output @ 8 ohms
  • Wi-Fi, Ethernet, Bluetooth, and HEOS
  • Works with Alexa, Siri, Google & Josh.ai
  • 3 x Optical & 1 x Digital Coaxial Inputs
  • 3 x Stereo RCA & 1 x Phono Input
  • Stereo RCA Output
  • Hi-Res Audio Support
  • Front OLED Info Display

Play hi-res audio from your analog, digital, and streaming sources with the Denon PMA-900HNE 100W Integrated Network Amplifier. Utilizing high-grade audio components, a vibration-resistant design, and a high current output, the PMA-900HNE is able to drive 50W per channel at 8 ohms to your existing loudspeakers with minimal noise. In addition to analog and digital inputs, this amplifier provides a dedicated USB Type-A port, a phono input for direct turntable connection, and HEOS Built-In for wireless access to a nearly limitless digital library. You can connect to your network via Wi-Fi or wired LAN, or stream via Bluetooth or AirPlay 2 from a mobile device.

Voice Control

This network amplifier supports Amazon Alexa, Google Assistant, Apple Siri, and Josh.ai for convenient voice control over media access and playback.

Hi-Res Audio

Whether through your network, external drive, or mobile device, the PMA-900HNE is capable of playing a variety of Hi-Res Audio codecs. It supports ALAC, FLAC, and WAV lossless up to 24-bit/192 kHz, in addition to DSD at 2.8 and 5.6 MHz.

Additional Features

  • Built-in phono equalizer for turntables with MM cartridges
  • Roon Tested
  • Headphone output
  • Front control knobs for volume, input selection, bass, treble, and balance
  • Front OLED info display
  • Auto power off

What's in the box:

  • Integrated amplifier
  • 68" AC power cord
  • Remote control (RC-1246)
  • Two "AAA" batteries
  • 2 WiFi/Bluetooth antennas
  • uick Start Guide
  • Spotify Connect Instructions
  • Heos Brochure
  • Safety Instructions
  • Notes on Radio
  • Warranty Information
  • Bluetooth/WiFi antenna note

SPECIFICATIONS

Amplifier

  • Amplifier Type:Integrated Amplifier (Preamp/Power Amp Combo)
  • Channels:2.1
  • Power Output per Channel:50 W at 8 Ohms / 20 Hz to 20 kHz / 0.07% THD,85 W at 4 Ohms / 1 kHz / 0.7% THD
  • THD:0.01% (1 kHz, 8 Ohms, Rated Output -3 dB)
  • Speaker Impedance:Not Specified by Manufacturer
  • Tone Control:Bass (100 Hz): ±8.0 dB,Treble (10 kHz): ±8.0 dB

Audio Processing

  • Supported File Formats:2.8 MHz DSD, 5.6 MHz DSD, AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA via USB/Network
  • Supported Sample Rates:Up to 192 kHz / 24-Bit

Connectivity

  • Rear A/V Inputs:3 x Optical TOSLINK,1 x Digital Coaxial,3 x Stereo RCA,1 x Stereo RCA (Phono MM) with Ground Screw,1 x USB Type-A
  • Rear A/V Outputs:1 x Stereo RCA Recorder,1 x RCA Subwoofer Pre-Out
  • Front I/O:1 x 1/4" / 6.35 mm Headphone Output
  • Other Rear I/O:1 x RJ45 (Ethernet) Input
  • Speaker Connectors:4 x Binding Post Pairs
  • HDCP Support:None
  • Media Card Slot:None
  • A/B Speaker Selection:Yes
  • Input Impedance:40 Kilohms (Source Direct Off)
  • Input Sensitivity:105 mV (High)
  • Signal to Noise Ratio:105 dB

Wireless Connectivity

  • Wi-Fi:Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac); Dual-Band (2.4 & 5 GHz)
  • Bluetooth:Yes
  • Wireless Audio Protocols:AirPlay 2, HEOS, Roon Ready

Control

  • Virtual Assistant:Works with Alexa, Works with Google Assistant, Josh.ai, Siri

Power

  • AC Input Power:Not Specified by Manufacturer
  • Power Consumption:Active: 200 W,Standby: 0.2 W

Physical

  • Dimensions (W x H x D):17.1 x 5.2 x 14.8 Inch , 434.0 x 131.0 x 376.0 mm
  • Weight:18.3 lb / 8.3 kg

Packaging Info

  • Package Weight:22.735 lb
  • Box Dimensions (LxWxH):20.1 x 18.8 x 10.2"
Open Full Site