PARASOUND NEWCLASSIC 2250 v.2
Features
- THX Ultra2 certified
- 275 watts x 2 into 8 Ω (all channels driven)
- 400 watts x 2 into 4 Ω or 2 Ω (all channels driven)
- 750 watts x 1 bridged into 8 Ω or 4 Ω
- 45 amps peak current per channel
- 2 Ohm stable operation with load selector switch
- Two pairs of speaker outputs with front panel A/B buttons
- Rear-mounted lockout switch disables front A/B buttons
- High pass filter, switchable for 20Hz or 40Hz
- Automatic on/off by DC trigger with looping output
- Automatic on/off by audio signal with 2 sensitivity settings
- Fully discrete circuitry with high current toroid transformer
- Bridging switch for stereo or mono operation
- Efficient, low heat design
- DC Servo and relay protection circuits
- Rear-mounted left and right gain controls
- Standby, channel status and high temperature indicators
- Gold-plated RCA input jacks
- Heavy duty 24k gold-plated 5-way speaker terminals
- 115/230v selector on rear panel
SPECIFICATIONS
| All Channels Driven |
|
| Bridged Mono |
|
| Current Capacity | 45 amps peak per channel |
| Frequency Response | 20 Hz - 50 kHz, +0/-3 dB, 1 watt |
| Dynamic Headroom | 1.6 dB |
| Total Harmonic Distortion |
|
| IM Distortion | 0.05% |
| Transient IM Distortion | Not measurable |
| S/N Ratio |
|
| Input Impedance | 33 k Ω |
| Input Sensitivity | 1 V in for 28.28 V out, THX standard |
| Inter-Channel Crosstalk | 85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz |
| Damping Factor | Over 150 at 20Hz |
| 12V Trigger Turn On | DC 9 – 12V, 15 mA |
| Audio Turn On |
|
| AC Power Requirement |
|
| Dimensions |
|
| Net Weight | 43 lbs (19.5 kg) |
| Rack Mount Accessory | May be Purchased Separately: RMK33 |